19 Royalty-Free Audio Tracks for "No Vibrato"

Playing the alto sax with vibrato with no mouthpiece, like a brass instrument.

Playing the alto sax with vibrato with no mouthpiece, like a brass instrument.

Arab flute.

An a 440 played on a flute inside a bedroom closet with no vibrato and a bad start.

Cool casio sk-1 effect when you hit the loop set button after pressing and holding a key. . . Vibrato should be on and use a sample (no preset).

Cool casio sk-1 effect when you hit the loop set button after pressing and holding a key. . . Vibrato should be on and use a sample (no preset).

Cool casio sk-1 effect when you hit the loop set button after pressing and holding a key. . . Vibrato should be on and use a sample (no preset).

A handmade low flute pitched to what scale i dunno.

D note of low pan flute zanka.

A short recording of a flute for an assignment in the course "audio signal processing for music applications".

It is an open a string sound with short bow strokes.

Another "shoegazey" clip using guitar though many pedals (boss xtortion > danelectro eq > boss me-30 (no effects on, but working as a slight boost) > eh small stone > korg ax3g (on a pitch/harmonizer setting) > boss dd-20 > behringer ultra vibrato > alesis nanoverb > mixer > soundcard. ) it's kind of similar to the beginning of "souvlaki space station", but it is in no way an approximate recreation (or even the same notes, i'm sure) of it. I messed around with levels and soundcard settings and was able to get a much cleaner, less distorted recording (compared to the guitar drone sample uploaded previously. ).

Just makes your ears hurt, doesn't it? could be great for something like a machine having a complete meltdown, or a robot going haywire. Created by taking a stock sound effect of guitar plugs being pulled and distorting, reversing, stretching, looping, adding phaser, flanger, vibrato, tremolo, i can't even remember what else, like there's no tomorrow. All done in wavepad. I also tried to make it loop, but it's up to you whether i succeeded or not.

What effects the color of the wave here on freesound? i could ask, but here is a little test. Part 1 - a (about) 60hz tone going from sinus to triangle (vcv-rack vco-2)part 2 - same tone. Sinus wave. An accelerating vibrato. Part 3 - now 2 tones. Same 60hz sinus tone plus another sinus tone slowly increasing in frequency creating beating effects. The second, rising, vco has a lower amplitude. All three part has the same peak amplitude (-4db)#colortest.

Algorithmic drone music program. The computer is my analog modular synth. 01 to 08 are clock sequencer steps. 00 rem osc_1 - wave shaped sin oscillator (osc) - tuned to 130hz00 rem osc_2 - clean sin from oscillator - tuned to 130hz00 rem osc_3 - sqr from oscillator through filter - osc tuned to 130hz00 rem clk speed = 0. 5 hz00 rem line 01 each of the 3 vcas gets an unique cv value ([gate] -> [3 s/h] -> [3 vca])00 rem ---------------------------------------------------01 sample values for vca (cv in) x 3 (osc_1, osc_2, osc_3)02 sample frq for osc_103 sample frq for osc_204 sample new clk speed05 sample frq for vibrato in osc_106 sample frq for osc_307 env to all vca08 sample cv for (osc_3) filter10 goto 01. When i begin the recording the program has been running for a while.

Made some adjustements and a new recording. Terrible result but fun work/programming!. Algorithmic drone music program. The computer is my analog modular synth. 01 to 08 are clock sequencer steps. 00 rem osc_1 - wave shaped sin oscillator (osc) - tuned to 130hz00 rem osc_2 - clean sin from oscillator - tuned to 130hz00 rem osc_3 - sqr from oscillator through filter - osc tuned to 130hz00 rem clk speed = 0. 5 hz00 rem line 01 each of the 3 vcas gets an unique cv value ([gate] -> [3 s/h] -> [3 vca])00 rem ---------------------------------------------------01 sample values for vca (cv in) x 3 (osc_1, osc_2, osc_3)02 sample frq for osc_103 sample frq for osc_204 sample new clk speed05 sample frq for vibrato in osc_106 sample frq for osc_307 env to all vca08 sample cv for (osc_3) filter10 goto 01. When i begin the recording the program has been running for a while.

Ok, i don't know how many of you might be interested in this, but i figure there's no harm in posting it. I'm working on some original songs. Laptop-based, electronic songs, with many orchestral parts, including violin, viola, cello, and string bass. Presonus studio one has some very nice vst string instruments, and i have some really great ones for kontakt. But they all are missing one thing, and i couldn't find the (admittedly esoteric) sound that i'm looking for anywhere on the internet. Being a viola player myself, i recorded myself playing these very particular incidental sounds. Let me explain-. There's this 'grabby' sound that a well-rosined bow makes just is it is first being drawn across the string. Listen carefully to any of the pros and you'll hear it. In your laptop sequences, if used subtly, right at the point where the first note of a phrase is initiated, this sound can give the string part a marked sense of realism*. This, combined with vibrato, reverb and a nice warm/tube/tape saturation setting, nobody will be able to tell the difference between your vst and the real thing. About the audio-i tried to keep them as pitchless as possible, thus not limiting their utility. I recorded two sets of all four open strings (c, g, d, a), first close mic'ed, and once from a few feet away, in stereo. Or to say it another way, the sounds are as follows-1. Open c close2. Open g close3. Open d close4. Open a close5. Open c far6. Open g far7. Open d far8. Open a far. It's totally overkill for me to record all the different versions, but i suppose somebody out there might find one more appropriate than another for their purposes. They work pretty effortlessly for violin and viola, but you might have to pitch them down for cello and string bass. I added no processing whatsoever, apart from normalizing each individual sound. Aiff, recorded at 44/16. Nady scm-2090 stereo condenser mic, focusrite saffire pro 24 interface, recorded in logic. Not the quietest room, but these sounds will be so far down in the mix that it won't matter. Free for all to download, no attribution necessary. Http://www. Freesound. Org/people/bruce%20burbank/sounds/220917/. As an example, here's the part i'm working on that motivated me to record these sounds, with the grabby sound in place. See if you can spot the three times i used it. *pro tip- much the same way i'll insert an inhale breath right before horn or oboe phrases.

In front of my desk in my room is a wood paneled wall with a cubbie. It's about a foot wide, 10 inches from top to bottom and maybe 7 inches deep. I'm just guessing. Around this cubbie is a border of wood. In the bottom right corner under the border i have jammed one end of an elastic string that used to have glitter on it. It's from a christmas box of chocolates my uncle sent me last year. I stand in front of this cubbie whose bottom is at chin height, (i'm only 5ft1in) so my arms are above my head as i pull this string across the cubbie to the border on the left which acts as my only fret. The string is a few inches longer than the cubbie is wide, but when i pull it it gets longer so my hand is 3/4 along it's length as i pull back and forth across the border to tighten and loosen the string. No matter how hard i pull it never pops loose from it's mooring. The recording starts with me standing up from my chair. In the first part until 01:54 i am playing the string at maybe 30° from horizontal. It has a buzzy quality that reminds me of an african folk instrument i can't remember the name of. From 01:33 to 01:54 i'm trying to imitate a korean folk vibrato kind of thing. In the second part until 02:29 i am playing 45 to 60° from horizontal and it sounds like a full-bodied string bass with no buzz. In the last part beginning at 02:34 i am playing about 75° from horizontal across the top border of the cubbie on the left so it sounds buzzy and african again, and i'm just going crazy goofing around with a crazy bluesy rock sort of rhythm. There didn't seem to be any homemade 1-stringed wall-cubbie basses on this site so here is mine, have fun. I don't play it if mom is home because the living room is on the other side of the wall and she can't hear tv. Also my neighbor can probably hear it in the next apartment lol. Recorded with microsoft lifecam 3000.

Created by divkid for use in the make noise soundhack morphagene. There are dry-only, fx-only, and mix versions of this reel in the pack. See it in action at https://youtu. Be/rk4ufmfcouc. Patch walkthrough. The patch starts with the qu-bit chance providing discrete random values (sample and hold) going into an instruo harmonaig. This takes the stepped random voltages and quantizing them to a given scale. I put in the notes c d eb f g ab bb which is a c natural minor scale, the relative minor of eb major (for anyone that's curious). However like most of my modular work i didn't actually tune the oscillators to anything specific. So treat the scale as a pattern of intervals not a set of specific notes. The quantized notes then form 4 voice chords giving us a root, third, fifth and seventh cv output that will be diatonic following the scale pattern, meaning the third will be major or minor, the seventh major, minor or dominant and the fifth natural or diminshed to suit the scale. With the 4 quantized outputs on the harmonaig these all go into the four oscillators on the synthesis technology e370 quad morphing vco. Each of the e370 oscillators are in the basic morph xy mode using the built in rom b set of wavetables. Wavetables are modulating by various mixes of the befaco rampage, mutable instruments tides, wmd multimode envelopes and music thing modular turing machine. The modulation sources are mixed and split with multiples and mixers. These modulating wavetables then go into a bubblesound vca4p where i'm using 4 mk1 intellijel dixie oscillators all un-synced and free running with sine wave lfos. Each lfo freely fades the voice in and out of the vca4p. As this is unsynced there's no regard to pitch changes linked to changes in amplitude and the swells. I find splitting the gate/rhythm from pitch regarding sequencing to be a freeing and interesting way to work that's not available on traditional instruments. This is just a simple application of that idea with the lfos fading freely unrelated to the other modulation or sequencing of pitch. The sound then goes from the vca4p mix out into a befaco mixer and praxis snake charmer which the output section of the larger case and i'm sending a 'pre' auxiliary out into my fx case. The dry sound first goes into the erica synths fusion delay / flanger vintage ensemble which is giving me short modulated delays giving vibrato like sounds and pushing the input level and overdrive gives us some warmth and grit that thickens up the sound and also fills in the gaps left by the free running lfos pulling quieter sounds and compressing in the on board tube. This then outputs to the feedback 1 bit multitap delay module which has it's delay chip pushed to longer times for some added crackle and noise. I'm using the two delay taps for a shorter and longer delay with little feedback to mix the dry sound for a generally noisier and smeared version of the input. This then goes into the xaoc devices kamieniec with it's on board lfo as slow as possibly for a mildly resonant phase shifting. This goes into mutable instruments clouds set to sew random grains slowly and randomly which are pitch shifted up 2 octaves to fill out some high end flourishes against the closed chord voicings at the core of the patch. Finally this goes into a long lush reverb from the halls of valhalla card in the tiptop audio z-dsp. The stereo fx chain and the mono dry signal are mixed in the befaco hexmix and recorded as a mixed stereo file. I'd consider this to be the main 'reel'. However i split the dry signal and the fx only wet stereo signal and recorded those at the same time so you can choose which reel to use and experiment with dry/wet or blended sounds from this patch.